Where are they now? Rhonda and John Zelukovic’s pro street Studebaker Hawk

Where are they now? Rhonda and John Zelukovic’s pro street Studebaker Hawk

With its nitro-snorting EFI Hemi, crazy suspension system, extensive body mods and left-of-field colour, Rhonda and John Zelukovic’s Studebaker Hawk floored the establishment when it rocked up to Summernats 10.

First published in the September 2023 issue of Street Machine. Photos: Ben Hosking

From there, the HOWBZR Stude went on to be the number-one star attraction at numerous Aussie shows, picking up no less than 11 trophies at the 1997 Melbourne Hot Rod Show and loads of other tinware during its travels. The Zelukovics even thought about shipping it across to the US of A, as they felt it was more than capable of taking on the Yanks at their own game.

All these years on, the Studebaker has made a few guest appearances here and there with the assistance of the Zelukovics’ son Ben, but it mostly just takes pride of place in the garage of the now-retired Rhonda and John. Mind you, John did build himself a beautifully restored version to keep it company, which you can also see here.

The Studebaker is like a time capsule, but it still looks remarkably fresh – has it had a makeover?

JZ: Other than repairing a small bit of damage it sustained at its very first Summernats, it’s never been touched; it’s still the original paint and trim. None of the polish has gone off, and it lives in a sealed room, so it doesn’t get very dirty. It hasn’t had a buff in 25 years, and has only ever been waxed about half a dozen times.

RZ: We only showed it for two years; after that, we haven’t driven it much.

JZ: A lot of people would get the shits whenever we turned up at shows. After a while, we just took it to exhibit rather than get it judged.

RZ: Ben has taken it to a few charity shows to help them help out, using it as a bit of a drawcard to attract people through the gate.

So it hasn’t done many miles over the years?

RZ: To be honest, I never really liked driving it; it’s too over-the-top. I’ve only driven it once or twice. Our son Ben has driven it more than us; he’s put about 500-600 kays on it.

JZ: We drove it into town a few times, which turned every head in sight. We kept it registered for about 10 years; then we thought, what’s the point? I’m sort of glad, as we’ve had those 20-inch-wide rear tyres well before we finished the car; they’re like 30 years old now.

Back in the day, it was a truly radical machine.

JZ: Pretty well everything was painted. There was no chrome, only polished stainless steel such as the exhaust, or polished alloy like the gearbox and intake set-up. It was also one of the first cars in Australia to have leather on the floors.

RZ: It went from an ugly duckling, something the kids didn’t want to be seen dead in, to jaw-dropping, something they all now want to own.

It was a huge hit at Summernats 10, where it won People’s Choice.

RZ: That was totally unexpected.

JZ: Victor Bray was there. He came over and had a really good look at the car. Victor loved it and commented, “I wouldn’t be caught dead with the colour. But it’s got a Hemi, and anything with a Hemi is my style of car.”

The colour was definitely controversial.

JZ: There’s been talk over the years about changing the colour to make it more masculine. Nobody could come up with a colour, so it’s stayed the same.

What sort of maintenance has it needed over the years?

RZ: When we built the car, everything was new; not one part has been repaired or replaced since we built it. It hasn’t done enough miles to hurt anything.

JZ: No oil leaks, no rattles, no squeaks – nothing.

I believe it’s been converted to run on pump fuel now.

JZ: We originally ran it on nitro, as the engine came out of a Top Fuel dragster. On nitro, it used about five litres just to start up. That got pretty expensive, as nitro was something like $60 a litre. It was like pouring money down the drain, and it was so temperamental to start. When Ben converted it to pump fuel, it went from six fuel pumps back to just two.

Six pumps? Sounds complicated!

JZ: Well, yes, but not as complicated as running two MicroTech ECUs. We had to run a second ECU to be able to drive 16 injectors. The whole system was fresh off the shelf, which was a big deal back in the mid-90s.

The height-adjustable front suspension was pretty cutting-edge back then, too.

JZ: No airbags back then! I designed the front end myself, which was based around a Rod City Repros double A-arm set-up. The coil-overs connected to rocker arms that pivoted via a pair of combine harvester linear actuators. Retracting the actuators dropped the car down. The good thing about this system is the coil-overs still work like normal no matter the ride height.

RZ: John had his friend build a voice-activated control box. You talk to the car to make it go up and down. It has three heights: full elevated for getting it on/off the bus we use to transport it around in; ride height; and pose mode!

Have you both enjoyed your journey with the car?

RZ: Oh yes, we’ve met so many nice people and got to see so many nice places through the car scene. We loved travelling around.

JZ: It’s been more love/hate with me. While building it, I had the bonnet propped open with a pool cue. Obviously it wasn’t strong enough, because it snapped and dropped the super-heavy bonnet on my head. Certainly didn’t love it that day.

You’ve both retired now; what does the future hold for the Studebaker?

RZ: We sold the business [John Zelukovic Smash Repairs in Orange] to the kids, Rebecca and Ben. They’ve owned it since 2004.

JZ: They’ll also inherit both Studebakers when we’re gone. I know they’ll take good care of them.

RZ: They’ll probably end up handing them down to the grandkids. We’ve got four grandchildren, and we’ve got cars for each of them.

JOHN’S FACTORY HAWK

John’s factory-spec Studebaker was purchased from Hollywood, USA, where it had been stored in a shipping container for over 20 years. The car was in really good shape except for the interior, where the rats had got in and ripped the seats and trim to shreds.

John stripped it to a bare shell and fully restored it back to original, other than two upgrades – air conditioning and a stereo system.

Seeing a factory-spec car parked next to the Zelukovics’ heavily modified version allows one to fully appreciate the scope of the work that went into HOWBZR.

HOWBZR HAWK IN DETAIL:

  • Deleted chrome trim around rear side glass
  • Wedge chopped roof
  • Door frames reworked
  • Laid-back front screen
  • Fabricated front nostrils blended into nose
  • Frenched headlights
  • Deleted front bumper
  • Indicators grafted into front edge of guards
  • Original guard vents shaved
  • Kawasaki side mirrors
  • Honda door handles
  • All badges shaved
  • Flush front and rear glass
  • Deleted chrome trim around rear side glass
  • Shaved door locks
  • Shaved roof gutters
  • Fuel filler cap smoothed over
  • Bolt-on rear fins permanently welded to body
  • Deleted chrome trim on fins
  • Shaved boot badge
  • Recessed number plate
  • Deleted rear bumper
  • Custom tail-lights
  • Stretched rear wheelarch openings
  • Side-exit exhaust
  • Doors wrap into sills

RHONDA & JOHN ZELUKOVIC
1960 STUDEBAKER HAWK

Paint: PPG Rhonda’s Apricot
Engine: 392ci Hemi
Induction: Eight-throttlebody EFI
Gearbox: 727 Torqueflite
Diff: 9in
Suspension: Cantilever double A-arm (f), four-link (r)
Interior: Full leather
Wheels: Weld; 15×5 (f), 15×16 (r)
Tyres: Mickey Thompson Sportsman Pro 33×21.5-15LT (r)
 

Related Posts

広陵高校野球部、新たな証言者による暴露でさらにピンチに

Read more

【速報】「傷つけてしまった人にお詫び」国分太一さんが初会見 「日テレの対応に問題」と人権救済申し立て後の進捗説明

【速報】「傷つけてしまった人にお詫び」国分太一さんが初会見 「日テレの対応に問題」と人権救済申し立て後の進捗説明   TBSテレビ 2025年11月26日(水) 14:12 国内 コンプライアンス上の問題を理由に番組を降板した国分太一さんが日本テレビの対応をめぐって日弁連に人権救済の申し立てをした問題で、国分さんがきょう(26日)都内で記者会見し、「自らがとった行動により、傷つけてしまった当事者の方にお詫びしたい」と謝罪しました。 元「TOKIO」の国分太一さんをめぐって、日本テレビは2025年6月、「過去にコンプライアンス上の問題行為があった」としてバラエティー番組から降板させています。 国分さんは10月、当時の日本テレビ側の対応に問題があったとして、日弁連に人権救済を申し立てていました。 国分さんはきょう(26日)、都内で代理人と記者会見し、「自らがとった行動により、傷つけてしまった当事者の方にお詫びしたい」と述べて、関係者に謝罪しました。 この記事を読んでいかがでしたか? 参考になる もっと知りたい 学びがある シェア X LINE コピー URLをコピーしました 関連タグ: 速報

Read more

杉本福井県知事が辞職の意向 職員セクハラ通報で引責か

 福井県の杉本達治知事 福井県の杉本達治知事(63)が辞職する意向を固めたことが25日、関係者への取材で分かった。職員からセクハラに関する通報を受けており、引責とみられる。杉本知事は同日午後4時から県庁で記者会見し、詳細を説明する。 福井県は10月22日、知事が職員に不適切なテキストメッセージを送ったとのセクハラに関する通報があったと発表。知事は定例会見などで、メッセージ自体の送信を認める一方、セクハラに当たるかどうかの認識は明言せず「調査の結果を待ち、適切に対応する」と述べていた。 4月にメッセージを受け取った職員が外部の窓口に通報した。

Read more

フジ『明石家サンタ』今年は放送見送り イブ深夜は『向上委員会SP』生放送

クリスマスの深夜に恒例となっているフジテレビ系バラエティ特番『明石家サンタの史上最大のクリスマスプレゼントショー』が、今年は放送見送りとなることが25日、明らかになった。24日深夜は『さんまのお笑い向上委員会』のスペシャルが生放送される。 明石家さんま クリスマスにひとり寂しくしている視聴者が、明石家さんまふんする“明石家サンタ”からの生電話で「今年起きた不幸話」を披露して合格すれば、豪華プレゼントが当たる同番組。1990年にスタートしてから、別の時期に放送されることがあっても、休むことなく続いてきた。 しかし、プレゼントは番組スポンサーなどから提供されているもので、さんまは今年3月、いわゆる「フジテレビ問題」で同局からスポンサーが相次ぎ撤退する状況を受け、自身のラジオ番組『MBSヤングタウン土曜日』(MBSラジオ)で、『明石家サンタ』の放送見送りの可能性に言及していた。 例年11月上旬には「不幸話」のハガキ募集を開始していたが、今年は行われていなかった。 今年は『明石家サンタ』の放送がないが、近年“予選会”が開催されていたレギュラー番組『さんまのお笑い向上委員会』のスペシャル版『さんまのお笑い向上委員会 クリスマス生放送SP』を、24日(24:25~26:25)に放送。今年の委員会に“クレーム”を持つゲストが参戦する生放送を展開する。出演はさんまのほか、飯尾和樹(ずん)、陣内智則、藤本敏史(FUJIWARA)、堀内健、吉村崇(平成ノブシコブシ)、井口浩之(ウエストランド)、マヂカルラブリー、レインボーなど。

Read more

「盟友」トランプ氏と共に 高市首相が大統領専用ヘリ「マリーンワン」搭乗時の写真を投稿

    トランプ米大統領の専用ヘリ「マリーンワン」に同乗した高市首相(高市首相のXから) 高市早苗首相が28日、米原子力空母ジョージ・ワシントンが停泊する横須賀港(神奈川県)まで同乗したトランプ大統領の専用ヘリ「マリーンワン」は、安倍晋三元首相も日米首脳会談時に搭乗し、トランプ氏にとって「親友」との思い出が詰まったヘリコプターだ。 マリーンワンの名称は、大統領が搭乗中の海兵隊ヘリのコールサイン(呼出符号)に由来する。複数の機種が使用されるが、いずれも室内は広めで、10人以上の乗客を収容できる。防音性が高く、乗客は普通の声量で会話を楽しめる。米側としては、トランプ氏が「安倍氏が気にかけていた政治家」である高市氏と友好関係を育む場を設けた格好だ。 高市氏は28日夜、マリーンワンの大統領席に座るトランプ氏の隣で撮影した笑顔の写真を自身のX(旧ツイッター)に投稿し、「私の素晴らしい盟友のトランプ大統領と共に!」とつづった。     米大統領専用ヘリ「マリーンワン」(ホワイトハウスHPから)

Read more

東京・足立区の火事で死亡したのは歌舞伎俳優・片岡亀蔵さん(64) 警視庁

東京・足立区の火事で死亡したのは歌舞伎俳優・片岡亀蔵さん(64) 警視庁 東京・足立区の火事で死亡したのは歌舞伎俳優・片岡亀蔵さん(64) 警視庁 2025年11月24日 12:34 歌舞伎俳優・片岡亀蔵さん(64) 24日未明、東京・足立区の製菓工場兼住宅で火事があり、男性1人が死亡しました。死亡したのは歌舞伎俳優の片岡亀蔵さんと身元が確認されました。 警視庁と東京消防庁によりますと24日午前4時ごろ、足立区東伊興の住宅で「3階から煙が出ている」と近隣住民から119番通報がありました。 現場は1階が製菓工場、2階と3階が住宅で、火は2時間ほどで消し止められましたが、火元の3階にいた男性2人が病院に搬送され、1人の死亡が確認されました。 死亡したのは歌舞伎俳優の四代目・片岡亀蔵さん(64歳 本名・片岡二郎)で、知人で住人の60代の男性はケガをしたものの意識はあるということです。 警視庁は火事の原因などを調べています。

Read more

Leave a Reply

Your email address will not be published. Required fields are marked *